Services
Whole-Home & Luxury RemodelingKitchen RemodelingBathroom RemodelingHome AdditionsCustom Decks & Outdoor LivingSiding & ExteriorsWindows & DoorsFinish Carpentry & CabinetryPermanent Lighting
Pricing Portfolio Learning Center
Start HereProject CostsContractor ReviewsArizona Deck GuideBuilding From Your PlansRemodeling FAQRemodeling Blog
Areas We Serve Contact About
Meet TorinOur ProcessCore ValuesJoin the TeamRedeemed Referral ProgramDesign Partner Program
Call (928) 277-5499
What James Hardie Siding Costs in Arizona

Siding & Exteriors Pricing · Arizona

What James Hardie Siding Costs in Arizona

Real planning ranges for fiber cement siding and exterior upgrades in the Valley and Northern Arizona, including installation over block and stucco homes.

What our siding projects run

$25,000 to $150,000

Most of our siding projects start around $25,000.

That covers a meaningful piece of the house, like the front elevation or accent walls and gables, installed with proper furring, flashing and trim. Smaller patches rarely justify the setup and approvals.

The short version

James Hardie siding from Redeemed Builders typically costs $25,000 to $150,000 in Arizona, or about $14 to $28 per square foot of wall. Accent walls and gables sit near the lower end. A full wrap of a large home with mixed profiles and tongue-and-groove soffits sits near the top. How much of the house you wrap is the biggest lever.

Why we published this

The decision that moves the number most: accent walls or the full wrap

Many Arizona homeowners do not need to wrap the whole house to change how it looks. Siding on the front elevation, the gables and an entry bump-out can transform the street view while the sides and back stay stucco.

A full wrap is a different project. Every wall gets furring and a drainage plane, every window and door gets trimmed and flashed, and the square footage often triples.

Both are good choices. But deciding between them first tells you more about your number than profile, color or trim.

What that means for you
Accent walls
Front elevation, gables and bump-outs. The lower end.
Most of the house
Front and sides, or a single-story full wrap. The middle.
Full transformation
Full wrap, mixed profiles, T&G soffits and porch ceilings. The upper end.
Per foot
About $14 to $28 per square foot of wall installed.

What moves the number

What actually drives the price

Six things move a siding project more than anything else.

Wall area

Square feet of wall is the base of the number. Two-story walls also need scaffolding or lifts.

What is underneath

On block or stucco we add furring and a drainage plane. Damaged sheathing or failing stucco must be repaired first.

Profile

Lap siding is the most efficient. Board-and-batten, shingle and panel profiles take more labor, and mixing them adds detail work.

Finish

ColorPlus factory finish costs more up front and holds color longer. Field painting costs less initially but needs repainting sooner.

Openings and trim

Every window, door, corner and penetration needs trim and flashing. Houses with many openings cost more per foot.

Soffits and ceilings

Tongue-and-groove wood soffits and porch ceilings add carpentry, but they are often what makes the exterior feel finished.

Placing your project

Where your project lands in that range

Here is how real siding projects move through the range.

Toward the lower end

Toward the lower end

Roughly $25,000 to $50,000. Hardie on the front elevation, gables and entry, with matching trim and paint, on a single-story home.

Through the middle

Through the middle

Roughly $50,000 to $95,000. A full wrap of a mid-sized single-story home, or most of a larger one, with ColorPlus finish and properly flashed openings.

At the upper end

At the upper end

Roughly $95,000 to $150,000. A full exterior transformation of a large or two-story home with mixed profiles, tongue-and-groove soffits and porch ceilings, and custom trim.

Bringing it down

What lowers the cost

If the number is higher than you hoped, these are honest ways to bring it down.

Start with the street side

Siding the front elevation delivers most of the visual change for a fraction of the cost.

Stick to one profile

Lap siding alone is the most efficient. Use a second profile only on gables.

Field paint

Field-painted siding costs less up front than ColorPlus, if you are comfortable repainting sooner.

Keep sound stucco

Where stucco is in good shape on the back and sides, a recoat there and siding up front is a sensible mix.

Phase soffits

Wood soffits and porch ceilings can be added later without redoing the siding.

Combine trades

Doing windows at the same time avoids trimming openings twice.

What to expect

Permits, lead times and living through it

Permits and HOA. Siding often needs HOA design review with color and profile samples, and some jurisdictions require a permit for exterior wall work. We review your CC&Rs and handle submittals.

Lead times. Hardie ColorPlus colors can take a few weeks to arrive. Field-painted material is often faster.

Disruption. Most of the work is outside, and you can live at home normally. Valley summer work starts early, and in Northern Arizona we plan around winter weather for paint and sealants.

How we work
Free ballpark, free site walk, free written proposal
Good, Better and Redeemed tiers, fixed scope and price
Material deposits paid straight to the supplier
A morning update every working day

Questions

Siding Cost, Questions Answered

How much does James Hardie siding cost in Arizona?

Our siding projects run $25,000 to $150,000, roughly $14 to $28 per square foot of wall. Wall area, prep, profile, finish and trim account for most of the difference.

How much does Hardie siding cost per square foot?

Plan on roughly $14 to $28 per square foot of wall installed. Simple lap siding on a single-story home sits at the low end. Mixed profiles, two-story walls and extensive trim sit at the high end.

Is Hardie siding more expensive than stucco?

Usually, yes, especially compared to a stucco recoat. It costs more up front but does not crack with normal house movement. Read the full comparison →

Can Hardie go over a block home?

Yes, we install furring and a drainage plane over the block or stucco, then siding over that. It is one of the things we do most.

What does ColorPlus cost compared to painting?

ColorPlus factory finish costs more up front but holds color longer in Arizona sun. Field painting costs less initially but usually needs repainting sooner.

How much do tongue-and-groove soffits add?

It depends on the length of soffit and ceiling area, but they are often a meaningful line item. Many clients add them to the entry and patio ceilings first.

How long does a siding project take?

Most siding projects take two to six weeks on site, depending on wall area, prep and weather.

Will my HOA allow siding?

Many do, especially on accents and gables. Some require stucco on most of the house. We check your CC&Rs before you spend anything.

Find out what your siding project would cost.

Tell us what you want built. Torin will give you an honest range and tell you where the money is best spent.

The ranges on this page are 2026 planning ranges for Arizona projects, drawn from the kind of work we build in the Phoenix Valley and Northern Arizona. They are not quotes. Your project's real number is the one in your written proposal, after Torin has walked the site and you have chosen a tier. That proposal is one quote, one time: the price changes only if you change the scope.

Last updated October 2026 · Written and reviewed by Torin Stansbury, owner of Redeemed Builders · Licensed Arizona KB-1 General Contractor, AZ ROC #365545